In the design of commercial, retail and hospitality spaces, linear lighting is often constrained by the geometry of the environment: parallel walls, regular ceilings, fixed layouts. The result is lighting that adapts to the space rather than enhancing it. LEDCO’s LINK System was created to reverse this logic: 48V luminous bars designed to be composed freely within any space, connected by a system of connectors that eliminates any compositional constraint.
The principle of the system
LINK is a modular system built around three fundamental elements: luminous bars, connectors and accessories. The logic is straightforward: choose the bars in the desired lengths, connect them via the appropriate connectors in the chosen configuration, and complete the installation with the necessary accessories. The result can be a straight line, a corner, a T-shaped composition, an X-grid — or any combination of these elements.
The luminous bars
LINK bars are available in three lengths: 50 cm (7.5W), 1 metre (15W) and 2 metres (30W). All operate at 48V with a colour temperature of 3000K (warm white), ensuring a warm, consistent light output across any composition. The round format and black finish give the bars a precise architectural character, capable of integrating into design-led environments without becoming intrusive.
The connectors: the true compositional freedom
The heart of the LINK system is its connector ecosystem, which makes it possible to build any luminous layout without limitations of direction or orientation. Each connector addresses a specific installation need:
- LK06/NE — High male connector with 120 cm cables, for feeding the composition from above
- LK07/NE — “U” support for bar, for direct fixing to ceiling or wall
- LK08/NE — Articulated connector 45°/315°, for angled compositions with complete freedom
- LK09/NE — Wall-to-ceiling connector, for transitioning from vertical to horizontal surface
- LK10/NE — Low male terminal connector with 120 cm cables
- LK11/NE — Low female terminal connector with 120 cm cables
- LK12/NE — Low angular connector, left
- LK13/NE — Low angular connector, right
- LK14/NE — Linear connector, for extending the composition in a straight line
- LK15/NE — “T” connector, for three-directional compositions
- LK16/NE — “X” connector, for four-directional compositions
The availability of articulated angular connectors, linear connectors, T and X connectors makes it possible to build luminous compositions of any shape — both in plan and in elevation — without resorting to custom solutions or on-site adaptations.
The accessories
The system is completed by a range of accessories designed to simplify installation and ensure a clean aesthetic result:
- Cable support (LK17/NE) — for tidy cable routing within the composition
- Suspension rod — for suspended installations from the ceiling
- Suspension kit — complete kit for pendant compositions
- Junction box — a technical element for concealing the 48V drivers, keeping the visible result free of exposed electrical components
Who it’s designed for
The LINK System is aimed at those who design environments where light is a design language, not merely a light source. Architects and lighting designers who want to build three-dimensional luminous compositions free from layout constraints; installers who need a flexible yet straightforward system thanks to its connector logic; clients who want a quality architectural result, with the freedom to modify and adapt the composition over time.
A system in which the light follows the project, not the other way around
Would you like more technical information about the LINK System or a consultation for your project?
Get in touch: our team is on hand to help you build the composition best suited to your needs